ACM and ACT Training Guide
Wide Angle Lens
In the Rig, the camera on the left, as you look at the cameras, will have the Wide Angle Lens.
A new template group named “U-Shaped - High Angle” has been added for Wide captures.
To switch between the standard and wide angle cameras you first click on Advanced Controls at the bottom of the Capture Info tab. Secondly you select Standard or Wide under Camera Controls.
On the Capture Info Tab, the Standard Camera controls will be the same as usual. You will see the Zoom Adjustments Radio buttons and on the Advanced Controls you will still see the Zoom Slider.
For the Wide Angle Camera, however, you will not see the Zoom Adjustments Radio buttons on the Capture Info tab. You will also notice that the Zoom Slider is not present for the Advanced controls for the Wide Angle Camera. This is because the Wide Angle Camera is set to 14mm and cannot be adjusted up or down.
If one of the cameras is broken during startup, the ACT will show the error above.
This is the Field of View from the Standard Camera at 18mm.
This is the Field of View from the Wide Angle Camera fixed at 14mm.